I fixed the faulty server, Now you can access again the free labs (mainly Cisco and Juniper routers)
Continue readingTag Archives: Online lab
Online lab fixed
For the last month, devices configuration did not reset every day,
Because of that, some devices was inaccessible,
The problem was in the script that responsible for reseting the devices for default configuration,
I fixed it and now all devices configurations are reset every 24 hours.
Connection to labswitch added
Tunnel from online lab – Cisco Router 5 added to labswitch
At Labswitch you have Free 24×7 access to Cisco Catalyst switches to learn networking,
More details about labswitch at – http://labswitch.blogspot.com
For you to route between the labs, you must create your own tunnel between the labs
(R5 – int fa0/1 at this lab –> SW7 – int fa0/11 at labswitch.blogspot.com (net 10.10.11.0/24)
To Test connection ping to 10.10.11.1 (LAN at labswitch.blogspot.com) from R5
Online lab- VMware ESXi server and vCenter appliance added
I added VMware Esxi 5.1 server and vCenter 5.1 appliance
Nexus1000v-1 is now a cluster of two Nexus1000v VSM
Also added the ESXi server as a module #3 (VEM) of the N1Kv
and created a SVS connection to the vCenter appliance
(Added a 1 VMware guest named (Server-1))
N1Kv-1# show module Mod Ports Module-Type Model Status — —– ——————————– —————— ———— 1 0 Virtual Supervisor Module Nexus1000V active * 2 0 Virtual Supervisor Module Nexus1000V ha-standby 3 248 Virtual Ethernet Module NA okN1Kv-1# show svs connections connection VC: ip address: 10.0.0.8 remote port: 80 protocol: vmware-vim https certificate: default datacenter name: Sharontools_DC1 admin: max-ports: 8192 DVS uuid: 3c b9 2b 50 c1 ce 31 07-0a 42 37 4f 2f e3 0b af config status: Enabled operational status: Connected sync status: Complete version: VMware vCenter Server 5.1.0 build-880146 vc-uuid: 64833C99-5F5B-4AD1-B690-72E1C838A3C6 |
Online lab- Cisco & Juniper routers added
More cisco routers (7200 and 3600 with switch module) and a Juniper router added to Online lab
Now you can configure vlans and QOS at the cisco 3600 router
Online lab- Topology changed
I redesign the lab topology
Now the 2 Juniper and 2 Cisco routers are connected with OSPF,
The 2 Cisco routers are connected with EIGRP between them,
(redistribute routes into OSPF from EIGRP) The Debian64 server is now connected to the LAN of the Cisco routers
Feel free to make changes,
Configuration is reset in every 24 hours
Online lab- Cisco router added
Online lab- 2 Juniper routers added
2 Juniper M series routers added to Online lab
I also added the network topology diagram
Online lab- Debian linux added
Linux server added to Online lab
Debian linux 64bit server v6.0.6
Online lab added
Connect to online network devices for free, for now i added only Nexus 1000v,
I will add more devices later on..