Config Generator Beta v1.8
Generate configuration files for switches




New
Open
Save
Example
Info

General

Vendor:
Hostname:
IP address:
Subnet Mask:
Default Gateway:
Routing enabled:
Managment Vlan:
(for Nortel)
stack:

Ports

Ports
you can Copy and Paste from Excel
rigth click on any cell for a paste wizard
Configure Ports:

Int NameDescriptionSpeed
[auto / 10 / 100
/ 1000 / 10000]		Duplex
[auto / full / half]		Vlans No.
[1 / 1,2]		Vlan Tagging
(802.1q)
[y / n]		Native Vlan No.
(PVID at Nortel)		Spanning tree
Port mode
[ normal / portfast ]

STP

Spanning tree:

Mode:
Bridge priority:

Bridge priority can be 0 to 61440 in increments of 4096,
The default priority for switches is 32768
Usually The Root Bridge priority is 4096

Vlans

Vlans
you can Copy and Paste from Excel
rigth click on any cell for a paste wizard
Configure Vlans:

#NameIp addressSubnet Mask

VRRP/HSRP

VRRP/HSRP
you can Copy and Paste from Excel
rigth click on any cell for a paste wizard
Configure VRRP/HSRP:

Vlan No.
Redundancy group
(usually same as
vlan no.)
Redundancy IP
(Cisco - HSRP
All other - VRRP)		Redundancy Priorety
(usually Master=150,
Standby=100>		Redundancy preemption
[y / n]

Config









Info
That Online tool helps you to configure Juniper, Nortel and Cisco switches
It's a totally free tool
You just need to enter the info about the things that you want to configure and click 'GO'
The Online tool will generate the configuration automaticly

I am still working to add more options to config..
Let me know (by the site Forum) for any feature that you need and i will add it.
(if i will find it usefull for others :) )



Links: Cisco - Nortel - Juniper