New
Open
Save
Example

General

Vendor:
Hostname:
IP address:
Subnet Mask:
Default Gateway:
Routing enabled:
Managment Vlan:
(for Nortel)
stack:

Ports

Ports
you can Copy and Paste from Excel
rigth click on any cell for a paste wizard
Configure Ports:

Int NameDescriptionSpeed
[auto/10/100
/1000/10000]		Duplex
[auto / full / half]		Vlans No.
[1 / 1,2]		Vlan Tagging
(802.1q)
[y / n]		Native Vlan No.
(PVID at Nortel)		Spanning tree
Port mode
[ normal / portfast ]

STP

Spanning tree:

Mode:
Bridge priority:

Bridge priority can be 0 to 61440 in increments of 4096,
The default priority for switches is 32768
Usually The Root Bridge priority is 4096

Vlans

Vlans
you can Copy and Paste from Excel
rigth click on any cell for a paste wizard
Configure Vlans:

-NameIp addressSubnet Mask

VRRP/HSRP

VRRP/HSRP
you can Copy and Paste from Excel
rigth click on any cell for a paste wizard
Configure VRRP/HSRP:

Vlan No.
Redundancy group
(usually same as
vlan no.)
Redundancy IP
(Cisco - HSRP
All other - VRRP)		Redundancy Priorety
(usually Master=150,
Standby=100>		Redundancy preemption
[y / n]

Config